Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 36

Bearbeitet von Jake Devincenzi -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Insert wisdom here.
+[* black] Use cutting pliers to cut one of the surface-mounted lead down to a length where you can bend it through the nearest hole in the battery contact with about 6 or 7 mm left over.
+[* black] After bending the lead through the hole, use the same through-hole soldering technique as earlier to solder the battery lead to the hole in the battery contact.