Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 36

Bearbeitet von David Hodson -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Use a pair of wire cutters pliers to remove about an inch of the positive terminal surface mount wire leads.
-[* black] Bend the wire lead around and through the positive ring terminal on the battery compartment.
-[* black] Use your now perfected through-hole soldering skills to solder the wire lead to the battery terminal.
-[* black] Cut any excess wire from the lead.
+[* black] Use a pair of wire cutters to remove about an inch of the positive terminal surface mount lead.
+[* black] Bend the lead around and through the positive ring terminal on the battery compartment.
+[* black] Use your now perfected through-hole soldering skills to solder the lead to the battery terminal.
+[* black] Cut off any excess lead.