Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Andrew Bookholt

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Rotate the computer 90 degrees clockwise so the power receptacle faces you.
[* red] Remove the three 3 mm Phillips screws along the edge of the lower case.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.

Bild 1

Alte Version

Neue Version