Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Bryce Nesbitt -

Bearbeitung genehmigt von Bryce Nesbitt

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[title] Optical Chain
+[* black] The outer ring has lenses to focus IR light, and a hole for the camera lens.
+[* black] The six infrared LEDs are on a thick board, with an aluminum heat spreader, and a connection to two solid metal blocks attached to the sensor board.
+[* black] The lens is manually focused and secured with what looks like hot melt glue (this may cause focus issues over time).
+[* black] There is just one piece of filter glass, flipped in place for day mode (higher end cameras use separate glass for day and night mode).
+[* black] The optical sensor is at the bottom of the stack. It's surrounded by a clear plastic sticker (if you know why, post in the comments!).

Bild 1

Kein vorheriges Bild

Hinzugefügt

Bild 2

Kein vorheriges Bild

Hinzugefügt