Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Guenther Roppele -

Bearbeitung abgelehnt von David Hodson

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Remove the two 3 mm Phillips screws securing the left ambient light sensor. One is silver and one is black, or both black.
+[* red] Remove one 3 mm Phillips screw & one 10mm Phillips screw securing the left ambient light sensor. One is silver and one is black, or both black. The longer one (usually black) is the one closer to the hinge
[* black] Disconnect the cable from the Logic board and remove the left ambient light sensor from your computer.