Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Andrew Bookholt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* redicon_note] Support the display with one hand as you remove the remaining T8 screws. There are
[* red] Remove the
two T8 Torx screws from each side of the display (highlighted in red boxes).
[* icon_reminder] When replacing the display, make sure that the right screw pins down the ground loop from the display data cable.

[* black] New lineDisconnect the two antenna cables from the airport/bluetooth card (shown in yellow circles).
[* redicon_note] Support the display with one hand as you remove the remaining T8 screws. There are
[* red] Remove the
two T8 Torx screws from each side of the display (highlighted in red boxes).
[* icon_reminder] When replacing the display, make sure that the right screw pins down the ground loop from the display data cable.

[* black] New lineDisconnect the two antenna cables from the airport/bluetooth card (shown in yellow circles).

Bild 1

Alte Version

Neue Version