Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Brady Cabe -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_note] Support the display with one hand as you remove the remaining T8 screws.
[* red] Remove the two T8 Torx screws from each side of the display (highlighted in red boxes).
[* icon_reminder] When replacing the display, make sure that the right screw pins down the ground loop from the display data cable.
[* black] Disconnect the two antenna cables from the airport/bluetooth card (shown in yellow circles)circles) and deroute them from under the other cabling.
[* black] Disconnect the two antenna cables from the airport/bluetooth card (shown in yellow circles)circles) and deroute them from under the other cabling.