Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Alistair Bell -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Remove the two Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx
Be aware that these screws on either side oflook very similar to the RAM slot.
[* orange] Four 14.5 mm Phillips
ten case screws along the hingeyou are about to remove but are actually shorter, so keep them separate.
[* red] Remove the two Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx
Be aware that these screws on either side oflook very similar to the RAM slot.
[* orange] Four 14.5 mm Phillips
ten case screws along the hingeyou are about to remove but are actually shorter, so keep them separate.

Bild 2

Gelöscht