Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 8

Bearbeitet von David Schubert

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Slide the keyboard ribbon out of its connector.
[* icon_note] If the keyboard ribbon won't slide out, make sure that the black plastic flap holding the ribbon in place is vertical.
[* black] It is common for the small ribbon just beside the keyboard ribbon to wear out with use in that model. (Keyboard and trackpad would not work but powerbutton will.) The solution is to apply pressure directly on that cable where it enters the flap (with a piece of plastic or a folded paper that is pushed against by the battery).