Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 8

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Slide the keyboard ribbon out of its connector.
[* icon_note] If the keyboard ribbon won't slide out, make sure that the black plastic flap holding the ribbon in place is vertical.
[* black] It is common for the small ribbon just beside the keyboard ribbon to wear out with use in thatthis model. (Keyboard and trackpad would not work but powerbuttonpower button will.) The solution is to apply pressure directly on that cable where it enters the flap (with a piece of plastic or a folded paper that is pushed against by the battery).
[* black] It is common for the small ribbon just beside the keyboard ribbon to wear out with use in thatthis model. (Keyboard and trackpad would not work but powerbuttonpower button will.) The solution is to apply pressure directly on that cable where it enters the flap (with a piece of plastic or a folded paper that is pushed against by the battery).