Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 9

Bearbeitet von tom sullivan

Bearbeitung genehmigt von Andrew Optimus Goldheart



[* black] Place the upper casing on its edge and use a spudger to push the keyboard away from the casing, poking the spudger through the central keyboard screw hole. Grasp the keyboard as it separates from the casing.
[* black] Maintaining your hold on the keyboard, lay the casing flat and gently bow the keyboard until the two tabs on either side of the keyboard come free.
[* black] Slide the keyboard away from the trackpad and out of the upper case.
[* black] '''Reassembly Tip:''' Ensure that the keyboard backlight ribbon emerges through the hole in the upper case.

Bild 1

Alte Version

Neue Version