Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 1

Bearbeitet von Walter Galan

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Disconnect the orange hard drive ribbon cable from the logic board.
[* black] Use aRemove tape as necessary and use a spudger to carefully loosen the adhesive securing the sleep light and IR sensor connectors to the top of the hard drive.
[* black] Peel up the orange tape covering
the sleep light and IR sensor connectors to the top of the hard drive.
[* black] Use aRemove tape as necessary and use a spudger to carefully loosen the adhesive securing the sleep light and IR sensor connectors to the top of the hard drive.
[* black] Peel up the orange tape covering
the sleep light and IR sensor connectors to the top of the hard drive.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Gelöscht