Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Walter Galan -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
-[* red] Remove the three silver T6 Torx screws securing the right fan to the logic board and lower case.
+[* black] Remove the three silver T6 Torx screws securing the right fan to the logic board and lower case.
[* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version