Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von mmonagan -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
-[* black] Remove the three silver T6 Torx screws securing the right fan to the logic board and lower case.
-[* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.
+[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up. Be sure to lift up on the right side as shown.

Bild 2

Gelöscht

Bild 3

Gelöscht