Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von davidlabbott2 -

Bearbeitung genehmigt von David Hodson

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Starting at a bottom corner, use the spudger to separate the rear case from the front display.
[* black] Move your way around towards the top on both sides. The plastic opening tool is easier to use for this step.
[* icon_caution] DetachingBe careful when detaching the top is tricky. Make suretop. Free each side, stopping short of the only thing holding it together iscenter of the top center. Gently bend backcover. Apply backward pressure on both top corners slightly bowingwith a finger applying pressure on the top of the back cover. While holding it in this bowed state you can then sidescenter, and slide the whole back cover down and it detaches with ease. It helps to push in ontoward the top back center while you bent backbottom of the sides/top cornersdevice. Note: The backforcing the cover can not slide until the sides are not just detached but held back out of the way. Trying to force the catch off any other way requires lots of force and may brake the catchresult in cracked plastic.
[* icon_caution] DetachingBe careful when detaching the top is tricky. Make suretop. Free each side, stopping short of the only thing holding it together iscenter of the top center. Gently bend backcover. Apply backward pressure on both top corners slightly bowingwith a finger applying pressure on the top of the back cover. While holding it in this bowed state you can then sidescenter, and slide the whole back cover down and it detaches with ease. It helps to push in ontoward the top back center while you bent backbottom of the sides/top cornersdevice. Note: The backforcing the cover can not slide until the sides are not just detached but held back out of the way. Trying to force the catch off any other way requires lots of force and may brake the catchresult in cracked plastic.