Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 1

Bearbeitet von gsarnold –

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] Remove the following ribbon cables and chips from the motherboard.
[* black] Use the spudger to gently pry each connection from the board.
+[* icon_note] NOTE: Before you can remove the mainboard, you must also remove the single screw at center, top next to the earpiece which holds the mainboard on to the case. (In fact, youmight just want to look at the Mainboard Replacement instructions at this point - it includes a couple of obvious omitted steps.)