Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Hayden Bishop -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* yellow] Using a phillipsPhillips #2 screwdriver, remove the four screws1" long, Phillips, PH#2 screws on the back of the printer (as indicated by yellow circles).
[* red] Gently lift the top panel (where indicated by the red squares) while simultaneously pulling off the back panel
printer.
[* yellow] Using a phillipsPhillips #2 screwdriver, remove the four screws1" long, Phillips, PH#2 screws on the back of the printer (as indicated by yellow circles).
[* red] Gently lift the top panel (where indicated by the red squares) while simultaneously pulling off the back panel
printer.

Bild 2

Gelöscht