Änderungen an Schritt Nr. 2

Bearbeitet von Chris Dobbins -

Bearbeitung genehmigt von Chris Dobbins

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Some devices may have a piece of tape or plastic over the ribbon cable latch. If your device has this, remove it before continuing.
[* black] Carefully lift the black ribbon cable latch upwards with a spudger or other similar tool.
[* black] Once the ribbon cable latch is opened, insert the pointed end of the spudger, or other similar tool, underneath the ribbon cable.
[* black] Slowly pull out the ribbon cable in a straight, flat straight motion with respect to the latch.
[* black] Slowly pull out the ribbon cable in a straight, flat straight motion with respect to the latch.