Änderungen an Schritt Nr. 2

Bearbeitet von Chris Dobbins -

Bearbeitung genehmigt von Chris Dobbins

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Flip the motherboard over and locate the soldered antenna connection.
[* black] Melt the existing solder with the tip of your soldering iron while gently pulling on the antenna. The antenna should come off easily.
[* icon_note] When reassembling your device, attach your new antenna to the motherboard using the two 2.4 mm2.4mm Phillips #00 screws before soldering. This will help to align the parts properly and make them easier to solder.
[* icon_note] When reassembling your device, attach your new antenna to the motherboard using the two 2.4 mm2.4mm Phillips #00 screws before soldering. This will help to align the parts properly and make them easier to solder.