Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Kelsea Weber -

Bearbeitung genehmigt von Kelsea Weber

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Turn heater over so the controls are facing up.
-[* red] Separate the front and rear housing at the bottom and open to the position shown.
+[* black] Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.
[* icon_note] Internal wires are connected to both halves of the housing. Be careful when separating the housing.

Bild 1

Alte Version

Neue Version