Änderungen an Schritt Nr. 1
Bearbeitet von Kelsea Weber –
Bearbeitung genehmigt von Kelsea Weber
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Locate the mating groove along side the device where the control panel cover plate is seated. Using the ifixit opening tool, place the skinny flat side of tool inside groove and with a twisting motion, pry the mating surfaces apart. Once to two surface have detached, gently pull the two surfaces apart with your fingers. |
|---|---|
| + | [* black] Locate the groove along side the device where the control panel cover plate are seated. |
| + | [* black] Using the ifixit opening tool, place the skinny flat side of tool inside groove and with a twisting motion, pry the mating surfaces apart. |
| + | [* black] Once to two surface have detached, gently pull the two surfaces apart with your fingers. |