Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Brett Hartt -

Wartet auf Freigabe



+[* icon_caution] When working with batteries, you must always remove the negative lead from the battery first, even if the corrosion is only on the positive lead.
+ [* black] It is also a very good idea to work with one hand behind your back, just to make sure that you don't accidentally short the circuit on the battery.
[* black] Using a ***box wrench*** loosen the nut on the screw holding the ***negative*** terminal in place.
- [* black] As a reference, the black cable is the negative (ground) terminal, and the red cable is the positive (hot) terminal.
[* black] If the corrosion is preventing you from accessing the nut, use a the other end of the wrench or another scraping tool to scrape some of the corrosion away.
[* black] Pull the negative battery cable off of the negative lead.