Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Brett Hartt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_caution] When working with batteries, you must always remove the negative lead from the battery first, even if the corrosion is only on the positive lead.
-[* black] Using a ***box wrench*** loosen the nut on the screw holding the ***negative*** terminal in place.
-[* black] If the corrosion is preventing you from accessing the nut, use a the other end of the wrench or another scraping tool to scrape some of the corrosion away.
+[* black] Using a 10mm hex wrench, loosen the nut on the screw holding the ***negative*** terminal in place.
+[* black] If the corrosion is preventing you from accessing the nut, use a the other end of the wrench or a wire brush to scrape some of the corrosion away.
[* black] Pull the negative battery cable off of the negative lead.