Änderungen an Schritt Nr. 4
Bearbeitet von Kevin Leuthold –
Bearbeitung genehmigt von Kevin Leuthold
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] After you remove the outer plate, the hard drive should be immediately visible in a casing that looks like this. The two screws that are located in the circles are all you need to remove to gain access to the hard drive. These will also require a Phillips #1 Screwdriver. |
|---|---|
| + | [* red] After you remove the outer plate, the hard drive should be immediately visible in a casing that looks like this. The two screws that are located in the circles are all you need to remove to gain access to the hard drive. These will also require a Phillips #1 Screwdriver and are 3mm long. |