Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Gabriel M. Santos E. -

Bearbeitung genehmigt von Gabriel M. Santos E.

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Slide the spudger until it is up against the bottom part of the key. Then rotate the spudger back and it should catch the key. Once the tip of the spudger is under the key, continue the prying motion until the key pops out.
-[* icon_note] We do this to avoid depressing the key. It becomes much harder to catch the lip with the button pushed down.
+[* black] Slide the plastic opening tool under the key you wish to remove until it is up against the bottom part of the key. Then, lever the plastic opening tool. It should catch the key. Finally, keep levering the key until it pops out.
+[* icon_note] We do this to avoid depressing the key. It becomes much harder to catch the lip with the key pushed down.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Kein vorheriges Bild

Hinzugefügt