Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Kyle Yue -

Bearbeitung genehmigt von Kyle Yue

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Slide the plastic opening tool under the key you wish to remove until it is up against the bottom part of the key. Then, lever the plastic opening tool. It should catch the key. Finally, keep levering the key until it pops out.
+[* black] Slide the plastic opening tool under the key you wish to remove until it is up against the bottom part of the key.
+[* black] Then, lever the plastic opening tool. It should catch the key.
+[* black] Finally, keep levering the key until it pops out.
[* icon_note] We do this to avoid depressing the key. It becomes much harder to catch the lip with the key pushed down.