Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 1

Bearbeitet von Elisabeth Garcia –

Bearbeitung genehmigt von Elisabeth Garcia

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Unscrew the two screws holding the plastic camera base to the metal base using the ph 1 screwdriver.
-[* black] Disconnect the two indicated cables by gently pulling them back.
+[* black] Unscrew the two 1 cm screws holding the plastic camera base to the metal base using thePH1 screwdriver.
+[* black] ***Be aware that cables are still connected under this base.*** Gently lift the plastic base with the camera away from the metal base with the motherboard.