AvertX HD810 PoE Cable Replacement Schritt Nr.1 Verlauf - iFixit

Änderungen an Schritt Nr. 1

Bearbeitet von Kira Kallem – 15. Mär 2017

Bearbeitung genehmigt von Kira Kallem

: Vorher
: Nachher
: Unverändert

Schritt-Zeilen

	[* icon_caution] *Make sure the device is turned off and unplugged ''completely'' before attempting any more disassembly .*
-	[* ~~black~~] Unscrew the two 1 cm screws holding the plastic camera base to the metal camera base using the PH1 screwdriver.
-	[* ~~red~~] *Be aware that cables are still connected under this base,* and gently lift the plastic base with the camera away from the metal base with the motherboard.
+	[* red] Unscrew the two 1 cm screws holding the plastic camera base to the metal camera base using the PH1 screwdriver.
+	[* black] *Be aware that cables are still connected under this base,* and gently lift the plastic base with the camera away from the metal base with the motherboard.