Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Kristen Gismondi -

Bearbeitung genehmigt von Kristen Gismondi

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Separate the housing in two parts
-[* icon_note] The dock connector is slid in two parts on the top of the system, make sure you slide the two housing parts in this line of direction.
-[* icon_note] The two parts are glued on the sides of the speakers, use some force to seperate the two housing parts.
-[* icon_note] Note that the internal parts are still connected to each other, don't pull the housing parts to far from each other.
+[* black] Separate the housing in two parts.
+[* black] The dock connector is slid in two parts on the top of the system, make sure you slide the two housing parts in this line of direction.
+[* black] The two parts are glued on the sides of the speakers. Use some force to separate the two housing parts.
+[* icon_note] The internal parts are still connected to each other. Don't pull the housing parts too far from each other.

Bild 1

Alte Version

Neue Version