Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Anoniem -

Bearbeitung genehmigt von Anoniem

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Disconnect the electrical connector between the two circuit boards.
-[* black] Now you can replace the broken dock connector with a new one.
-[* icon_note] The connector are quite tight connected, hold the other circuit board to prevent it from breaking while disconnecting the electrical connector.
+[* black] Disconnect the 5-pin connector between the two circuit boards.
+[* icon_note] The connectors are quite tight connected, hold the other circuit board to prevent it from breaking while disconnecting the electrical connector.