Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 10

Bearbeitet von Anoniem -

Bearbeitung genehmigt von Anoniem

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[* black] Heat up the solder
+[* icon_note] If you don't want to damage your workspace, it's probably handy to place something underneath.
+[* icon_note] The circuit board will getting hot, to make it more stable you can clamp it in a vise or with alligator clips.
+[* icon_caution] The heated solder tend to fume, do not inhale this! Do this in a well ventilated room.

Bild 1

Kein vorheriges Bild

Hinzugefügt