Änderungen an Schritt Nr. 7
Bearbeitet von Adam Marzec -
Bearbeitung genehmigt von Adam Marzec
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* red] Pull the tweeter out about 2 inches and using the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter. |
| [* red] Pull the tweeter out about 2 inches and using the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter. |
| [* red] Repeat process for the second tweeter. |
Bild 1
Alte Version
Neue Version
Bild 2
Alte Version
Neue Version