Änderungen an Schritt Nr. 7
Bearbeitet von Patrick Emery -
Bearbeitung genehmigt von Patrick Emery
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* red] Pull the tweeter out about 2 inches and using the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter. |
| [* |
| [* |
| [* icon_caution] Be sure not to excessively bend the bare wires in order to reuse it for the replacement tweeters |
Bild 1
Alte Version
Neue Version
Bild 2
Alte Version
Neue Version