Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 7

Bearbeitet von Patrick Emery -

Bearbeitung genehmigt von Patrick Emery

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] PullWhile holding the tweeter out about 2 inches. Usingtweeter, feed the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter.
[* orange] Repeat process for the second tweeter.
[* icon_caution] Be sure not to excessively bend the bare
wires in order to reuse it forthrough the replacement tweetershole.
[* red] PullWhile holding the tweeter out about 2 inches. Usingtweeter, feed the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter.
[* orange] Repeat process for the second tweeter.
[* icon_caution] Be sure not to excessively bend the bare
wires in order to reuse it forthrough the replacement tweetershole.

Bild 1

Alte Version

Neue Version

Bild 2

Gelöscht