Änderungen an Schritt Nr. 7
Bearbeitet von Adam Marzec -
Bearbeitung genehmigt von Adam Marzec
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
[* red] Pull the tweeter out about 2 inches and using the pliers, undo the wires that are wound around the two small rods protruding from the bottom of the tweeter. |
[* red] Repeat process for the second tweeter. |
[* icon_caution] Be sure not to excessively bend the bare wires in order to reuse it for the replacement tweeters |