Änderungen an Schritt Nr. 8
Bearbeitet von Patrick Emery -
Bearbeitung genehmigt von Patrick Emery
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
[* black] Pull the tweeter out about 2 inches. [* black] Using the pliers, undo the wires that are wound around the two small rods |
[* black] Pull the tweeter out about 2 inches. [* black] Using the pliers, undo the wires that are wound around the two small rods |
[* black] Repeat process for the second tweeter. |
[* icon_caution] Be sure not to excessively bend the bare wires in order to reuse it for the replacement tweeters. |