Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 10

Bearbeitet von Jacob Dungan -

Bearbeitung genehmigt von Jacob Dungan

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Entering Data and Variable
[* icon_note] If you imported data, ignore this step and skip to step 10.
[*
black] Make sure you are in “Variable View” onby checking the bottom left corner of your screen.
[* icon_note] (IGNORE THIS STEP IF YOU IMPORTED EXISTING DATA AND SKIP TO STEP 10)

[* black] Put your variable in the upper left hand spotcell (no spaces) and make sure the measure is set to “Scale.”
[* icon_note] If you imported data, ignore this step and skip to step 10.
[*
black] Make sure you are in “Variable View” onby checking the bottom left corner of your screen.
[* icon_note] (IGNORE THIS STEP IF YOU IMPORTED EXISTING DATA AND SKIP TO STEP 10)

[* black] Put your variable in the upper left hand spotcell (no spaces) and make sure the measure is set to “Scale.”
[* black] Switch to “Data View”
[* black] PlugWhile in your"Data View," plug in the data points under the column you just labeled in "Variable View" in "Data View."
[* black] '''Column''': The vertical lines of data located in the SPSS program.
[* black] '''Row''': The horizontal lines of data located in the SPSS program.
[* black] PlugWhile in your"Data View," plug in the data points under the column you just labeled in "Variable View" in "Data View."
[* black] '''Column''': The vertical lines of data located in the SPSS program.
[* black] '''Row''': The horizontal lines of data located in the SPSS program.