Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 10

Bearbeitet von Maida Berg -

Bearbeitung genehmigt von Maida Berg

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Entering Data and Variable
[* icon_note] If you imported data, ignore this step and skip to step 10.
[* black] Make sure you are in “Variable View” by checking the bottom left corner of your screen.
[* black] Put your variable in the upper left hand cell (no spaces) and make sure the measure is set to “Scale.”“Scale” as seen in Figure 1.
[* black] Switch to “Data View.”View” as seen in Figure 2.
[* black] While in "Data View," plug in the data points under the column you just labeledlabeled as seen in Figure 3.
[* black] Put your variable in the upper left hand cell (no spaces) and make sure the measure is set to “Scale.”“Scale” as seen in Figure 1.
[* black] Switch to “Data View.”View” as seen in Figure 2.
[* black] While in "Data View," plug in the data points under the column you just labeledlabeled as seen in Figure 3.