Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Andrew Bookholt -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.
[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Bild 1

Alte Version

Neue Version