Repariere deine Sachen Community Store

Änderungen an diesem Schritt

Bearbeitet von Joe Kendall –

Bearbeitung genehmigt von Joe Kendall

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Remove six outside 7.0 mm Phillips J1 screws.
-[* orange] Remove seven inside 8.0 mm Phillips J1 screws.
-[* yellow] Remove one inside 3.0 mm Phillips J1 screw.
+[* red] Using the Philips J1 Screwdriver Bit and Driver, remove six outside screws (7.0 mm).
+[* orange] Using the Philips J1 Screwdriver Bit and Driver, remove seven inside screws (8.0 mm).
+[* yellow] Using the Philips J1 Screwdriver Bit and Driver, remove one inside screw (3.0 mm).