Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 1

Bearbeitet von Nick –

Bearbeitung genehmigt von Nick

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Remove the chassis screws
[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the ***Phillips #1*** bit to do this.
-[* icon_caution] The second screw, marked in orange is directly screwed into the chassis. DO NOT overtighten this screw. If you do this, the clip will break in this area and you will need to replace it, since there are only 2 screws that hold the hard drive in.
+[* icon_caution] The screw marked in orange is directly screwed into the chassis. ***If this screw is overtightened, the hard drive clip will need to be replaced.***