| - | [* icon_reminder] These bumpers are held in with double sided tape. The tape will likely lose it's stickiness after one use, but it is not required to secure the drive bumpers. |
|---|
| - | [* black] Once the drive is removed from the clip, remove the rubber bumpers. To do this, pull them off of the drive as shown in the guide pictures. Transfer these bumpers to your replacement drive. |
|---|
| + | [* icon_note] These bumpers are held on with double sided tape. The tape will likely lose it's stickiness, but it is not required. |
|---|
| + | [* black] Once the drive is removed from the clip, remove the rubber bumpers. Pull these off of the old drive, and transfer them to the replacement. |
|---|