Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 5

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* yellow] The large cylindrical object on the right side of the board is the flash capacitor.
[* icon_caution] '''WARNING: The flash capacitor may carry high voltage, that may persist for hours or even days after the camera has been switched off and/or the battery has been removed.'''
[* yellow] Touching the circuit board while the capacitor still holds its charge may result in a painful electric shock that you will long remember.
[* blue] To make the board safe to work on, short out the two marked terminals with a [guide|2177|capacitor discharge tool] or the blade of a screwdriver or similar implement (with an insulated handle!) You might have to use moderate pressure to punch through the white goop that covers one of the terminals.
[* blue] To make the board safe to work on, short out the two marked terminals with a [guide|2177|capacitor discharge tool] or the blade of a screwdriver or similar implement (with an insulated handle!) You might have to use moderate pressure to punch through the white goop that covers one of the terminals.
[* blue] There might be little sparks and/or an audible pop. Be careful not to short other solder connections nearby.
[* icon_caution] '''Use a multimeter to check that dangerous voltage is no longer present before you proceed.'''
[* red] Unsolder all of the wires on the top of the logic board.