iMac G5 20" Model A1076 Hard Drive Replacement Schritt Nr.2 Verlauf

Änderungen an Schritt Nr. 2

Bearbeitet von Walter Galan – 21. Jul 2009

	[* red] Remove the two 6 mm T10 Torx screws from the hard drive and remove the hard drive bracket.
-	[* icon_note] The hard drive bracket with the thermal sensor board is attached to the SATA connector side of the hard drive.
+	[* icon_reminder] The hard drive bracket with the thermal sensor board is attached to the SATA connector side of the hard drive.
+	[* icon_note] If you are installing a new hard drive, we have an [guide\|751\|OS X install guide] to get you up and running.