Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Christopher Cox -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Removing the fan
[* black] Locate the two (2) Phillips #2 screws, remove them and put them somewhere safe.
[* icon_note] It is not necessary to detach the cooling fan wire from the power switch board.
[* icon_note] It is not necessary to detach the cooling fan wire from the power switch board.
[* black] Lift the fan housing slightly and slide it outwards and away from the rest of the unit. Just lay it on its side next to the unit.