Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Lauren -

Bearbeitung genehmigt von Jeff Suovanen

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Removing the cooling fan
[* black] Locatered] Unscrew the two (2) Phillipsscrews using a #2 screws, remove them and put them somewhere safephillips screwdriver.
[* black] Locatered] Unscrew the two (2) Phillipsscrews using a #2 screws, remove them and put them somewhere safephillips screwdriver.
[* icon_note] It is not necessary to detach the cooling fan wire from the power button switch board.
[* black] LiftSlightly lift the cooling fan housing slightly andfan; slide it outwards and away from the rest of the unit. JustGamecube and lay it on its side nextoff to the unitside of the console.
[* black] LiftSlightly lift the cooling fan housing slightly andfan; slide it outwards and away from the rest of the unit. JustGamecube and lay it on its side nextoff to the unitside of the console.