Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 10

Bearbeitet von Christopher Cox -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Testing and further adjustments
[* black] Now to test. Re-assemble your console but don't put any screws back but those needed for the ground springs near the memory card slots.
[* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console! I do not know why, but I read that it was important.
[* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console! I do not know why, but I read that it was important.
[* black] If any further adjustments are necessary just turn the potensiometer no more than 1 or 2 degrees more per readjustment. Eventually you'll start to see less DRE messages.
[* icon_note] Once you get no more DRE messages, turn the potensiometer a further 1-2 degrees to "future-proof" your lens from DRE messages in the future.
[* icon_note] If you've had to turn the potensiometer any more than 100 degreesAs stated in total thenthe title of this guide. This procedure may not fix your DRE messages probably stem from a faulty lens or optical drive motorproblems if the discs don't even spinfaut lies elsewhere in the system. But this will cover about 98% of DRE messages.
[* icon_note] If you've had to turn the potensiometer any more than 100 degreesAs stated in total thenthe title of this guide. This procedure may not fix your DRE messages probably stem from a faulty lens or optical drive motorproblems if the discs don't even spinfaut lies elsewhere in the system. But this will cover about 98% of DRE messages.