Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 1

Bearbeitet von Joe Kendall –

Bearbeitung genehmigt von Joe Kendall

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Using the Philips J1 Screwdriver Bit and Driver, remove the six outside screws (7.0 mm).
-[* orange] Using the Philips J1 Screwdriver Bit and Driver, remove seven inside screws (8.0 mm).
-[* yellow] Using the Philips J1 Screwdriver Bit and Driver, remove one inside screw (3.0 mm).
+[* red] Using the JIS J1 Screwdriver Bit and Driver, remove the six outside screws (7.0 mm).
+[* orange] Using the JIS J1 Screwdriver Bit and Driver, remove the seven inside screws (8.0 mm).
+[* yellow] Using the JIS J1 Screwdriver Bit and Driver, remove the one inside screw (3.0 mm).