Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 17

Bearbeitet von Andrew Bookholt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] UseInsert the flat end of a spudger into the gap between the SATA data connector and the hard drive.
[* black] Twist the spudger to pryseparate the two serial ATA connectors straight awaySATA data connector from the hard drive, then disconnect it from the hard drive.
[* icon_note] Repeat this process for the SATA power connector.
[* black] UseInsert the flat end of a spudger into the gap between the SATA data connector and the hard drive.
[* black] Twist the spudger to pryseparate the two serial ATA connectors straight awaySATA data connector from the hard drive, then disconnect it from the hard drive.
[* icon_note] Repeat this process for the SATA power connector.