Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von erthw46uhw4t -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Lift up theUse a spudger to disconnect ribbon cables that connect the display to the motherboard. Make sure to remove the cables in the order they are labeled (1cable(s) 1, 2, 3). 3 isand 3.
[* black] Just
a little trickier, because itreminder. The 3rd cable is actually connected to the board by a port, and locked into the board. Use a spudger to prywhich requires an inset connector.
[* icon_reminder] Lift
up the black tab inon the back of the inset connector port, and slipthen the 3rd cableribbon should slide right out.
[* black] Lift up theUse a spudger to disconnect ribbon cables that connect the display to the motherboard. Make sure to remove the cables in the order they are labeled (1cable(s) 1, 2, 3). 3 isand 3.
[* black] Just
a little trickier, because itreminder. The 3rd cable is actually connected to the board by a port, and locked into the board. Use a spudger to prywhich requires an inset connector.
[* icon_reminder] Lift
up the black tab inon the back of the inset connector port, and slipthen the 3rd cableribbon should slide right out.

Bild 1

Kein vorheriges Bild

Hinzugefügt